Your complete Void Acoustics package includes:

Four (4) Void Acoustics Venu 8 v1 Speakers
Passive 8" Two-Way Surface Mount Loudspeaker
Surface Mounts Included

One (1) Used Void Acoustics Bias Q2 Amplifier
Power Supply & Rack Mounts Included
 

Made in the UK.

*****

Amplifier Key Features:

The four channel Bias Q2 DSP+D amplifier provides reliable premier-grade power and headroom in the smallest possible package size.

A high efficiency microprocessor-controlled power supply with built in PFC (Power Factor Correction) allows flawless worldwide operation with any AC mains voltage in the range of 85-275 VAC, tolerant to peak up to 400 V. The patented SRM (Smart Rails Management) technology maximises the efficiency, while drastically reducing power consumption at any load and usage condition. A secondary, highly efficient power supply keeps the system responsive at any operating condition, so that system checks and monitoring can be performed even in stand-by and deep-sleep modes.

Designed to work with lo-Z (from 2 Ω) and with 70V/100V distributed lines, any mixed configuration of low and high impedance output loads can be achieved, making the Bias Q2 suitable for all applications in installed sound reinforcement systems.

DSP+D versions of the Bias Q2 extend system performance, with the support of Dante™ digital audio networking architecture and the on-board, high-end signal processing.

Specifications:
- Number of channels 4
- Input 100-240 V 50-60 Hz PFC
- Frequency response 20 Hz - 20 kHz (±0.5 dB)
- Input impedance 20 kΩ Balanced
- Output per channel 1500 W @ 2 Ω, 1200 W @ 4 Ω, 1200 W @ 8 Ω
- Output bridged 3000 W @ 4 Ω, 2400 W @ 8 Ω
- Dampening factor > 500 @ 8 Ω, 20-200 Hz
- S/N ratio > 110 dB (20 Hz - 20 kHz)
- Crosstalk seperation typical -70 dB @ 1 kHz
- THD+N < 0.1% (typical < 0.05%) from 1 W to full power
- DIM < 0.05% from 1W to full power
- Slew Rate 50 V/μs
- Peak output voltage 139 V
- Peak output current 45 A
- AD Converter Dual 24 bit Tandem® @ 48 kHz with 125 dB-A Dynamic Range -0.005% THD+N
- DA Converter Dual 24 bit Tandem® @ 48 kHz with 117 dB-A Dynamic Range -0.003% THD+N
- Internal precision 32 bit floating point
- Crossover Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR)
- Height 44.5 mm (1.75")
- Width 483 mm (19")
- Depth 358 mm (14.1")
- Weight 7 kg (15.4 lb)

*****

Speaker Key Features:

The 8” based Venu 8 has been designed to offer everything you could ask for from an installation loudspeaker. The entire Venu series has been created from the demands of many leading installation contractors and engineers around the world.

- Compact and unobtrusive appearance
- Rotatable 90°H x 60°V HF waveguide
- 8" low frequency driver
- 1" high frequency compression driver
- Textured polyurethane finish, optional custom colours
- Multiple internal M8 rigging points
- Weather-resistant perforated steel grille

Features that make the passive two-way Venu 8 so convenient to install and use include: the Easy Hang wall bracket that supports the enclosure, either vertically or horizontally, and requires only one set of hands to attach the enclosure; the Phoenix connector with link through for quick and reliable hook ups; the rotatable 90° horizontal by 60° vertical high frequency horn allowing the correct dispersion to be maintained in vertical or horizontal mounting positions; electronic high frequency protection for increased reliability; M8 flying points for horizontal ceiling suspension; weather-resistant grille and fittings suitable for beach bars and other corrosive environments; the rotatable logo to allow for correct display, in either vertical or horizontal positions; and an enclosure made entirely from 15 mm multi-laminate birch plywood.

Specifications:
- Frequency Response 60Hz - 22kHz ±3dB
- Efficiency 97dB 1w/1m
- Crossover Point 2.3kHz passive
- Impedance 8 ohms
- Power Handling 300 Watts RMS
- Maximum Output 121dB cont, 124dB peak
- Driver Configuration 1 x 8" LF, 1" HF compression driver
- Dispersion 90°H x 60°V rotatable
- Protection HF electronic device
- Connectors 1 x Phoenix with link out
- Height 415mm (16.3")
- Width 260mm (10.2")
- Depth 223mm (8.8")
- Weight 11.5kg (25.3lbs)
- Enclosure 15mm birch plywood
- Finish Textured polyurethane
- Grille Weather-resistant perforated steel with foam filter