Professionally maintained and teched prior to shipment. ***Sold in pairs w/dual roadcase*** 

The self-powered, narrow-coverage UPQ‑2P loudspeaker offers extremely high power output and low distortion, as well a focused beamwidth, which make it an ideal solution for small to mid-sized venues, houses of worship, theaters, and nightclubs—as either a stand-alone loudspeaker or as part of an array. The loudspeaker’s extended low-frequency headroom delivers a smooth coverage over a wide operating frequency range of 55 Hz to 18 kHz. With its intuitive and versatile QuickFly® rigging options, the UPQ‑2P supports touring and rental solutions or fixed applications. 

The UPQ‑2P is distinguished by its constant-Q horn with a narrow beamwidth (50° by 50°) that yields precise coverage and minimal interaction with walls and neighboring loudspeakers in arrays. The horn’s smooth and accurate performance, the result of meticulous research in Meyer Sound’s anechoic chamber, exhibits a remarkably consistent beamwidth in both the horizontal and vertical planes across a wide frequency range of 1–18 kHz. In addition, the UPQ‑2P horn delivers uniform attenuation for all frequencies outside the specified beamwidth. 

Designed and built at Meyer Sound’s Berkeley, California factory, the UPQ‑2P’s drivers include a low frequency 15-inch neodymium magnet cone driver and 4-inch diaphragm compression driver. A proprietary two‑channel, class AB/H power amplifier with complementary MOSFET output stages yields a peak power output of 2250 W. Audio input is routed through an electronic crossover,correction filters, and driver‑protection circuitry. Phase‑corrected processing, optimized specifically for the UPQ‑2P, ensures flat acoustical amplitude and phase response, resulting in anexceptional impulse response and precise imaging. Amplifier channels have sophisticated limiters that are easily monitored withthe limit LEDs on the unit’s rear panel. 

The UPQ‑2P’s modular amplifier and processing electronics are equipped with Meyer Sound’s Intelligent AC™ power supply, which adapts to any power voltage worldwide and provides soft‑turn on and transient protection. The UPQ‑2P comes standard with XLR input and looping output connectors; an optional version of the loudspeaker includes polarity switching and input attenuation (from 0 dB to –18 dB). The optional RMS™ remote monitoring system module provides comprehensive monitoring of loudspeaker parameters from a host computer running Compass® software. 

The UPQ‑2P’s durable trapezoidal enclosure has a slightly textured black finish. The end plates, which are made of heavy‑duty, highstrength, corrosion-resistant 6061‑T6 aluminum, include threaded M10 attachment points for basic eyebolt rigging, and a receptacle for third-party pole mounting. QuickFly rigging options include the MPA‑UPQ pick‑up and array plate, and the MYA‑UPQ mounting yoke. Other options include Meyer Sound weather protection, custom cabinets without handles, and custom color finishes for specific cosmetic requirements.