LOCAL PICK UP ONLY!!! VERY GOOD CONDITION!!

The Furman PL-8 II Power Conditioner is what you need to protect your valuable equipment from power spikes and sags. An advanced Series Multi-Stage Protection Plus (SMP+) circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Linear Filtering Technology (LiFT). Unit has 8 rear-panel outlets and one front-panel outlet, a 15-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back panel connector for gooseneck lamp with front-panel switch, and a front-panel circuit breaker. Fits in one rack unit and comes with a 10', 14-gauge, heavy-duty power cable and 3-year limited warranty.

Furman's Series II power conditioners feature the Series Multi-Stage Protection (SMP) circuit and the exclusive Linear Filter Technology (LiFT). The maintenance-free SMP surge suppression handles the most extreme transient voltage spikes are safely absorbed, clamped, and dissipated without destruction of the circuit. LiFT takes ensures optimal performance through linear filtering with no leakage to ground, protecting the audio and video quality of your signal. 

A master switch controls operation of the rear outlets, and the front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The Series II conditioners come with a 10', 14-gauge, heavy-duty power cable.

SPECIFICATIONS 

PL-8 II Power Conditioner

• Dimensions: 1.75" H x 19" W x 10.5" D 
• Weight: 11 lbs. (5 kg) 
• Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards 
• Current rating: 15 amps
• Operating Voltage: 90 to 140 VAC 
• Over Voltage Shutdown: 140 VAC typically 
• Voltmeter Accuracy: PL-PLUS II only: ±2 VAC, calibrated with internal trimpot adjustments 
• Spike Protection Modes: Line to neutral, zero ground leakage 
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA/CIDA A-1-1, 6,000 VAC @ 3,000 Amps) 
• Response time: 1 nanosecond 
• Maximum surge current: 6,500 amps 
• Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz”Linear attenuation curve
  from 0.05-100 Ohms line impedance 
• Power consumption: 6W 
• Safety Agency Listings: CE, NRTL-C