Professionally maintained and teched prior to shipment.

The LD360 DMX is unique in the market of small portable dimmers. A single breaker is used on the pack instead of individual fuses per each channel. As a result, the limits of the dimmer are pack limits, not channel limits.

The LD360 DMX accepts DMX 512 1990 as specified by USITT. DMX signal requires the use of cable rated for data communication at 250K baud; for this reason the use of microphone cable is NOT recommended. DMX rated cables are available pre-manufactured from your Leprecon dealer. For more information on the DMX standard and acceptable cable, see the Appendix of this manual. For convenience, two connectors are provided on the LD360DMX. This allows easy connection to additional dimmer packs. The DMX standard allows up to 32 dimmers to be connected to a single DMX controller. For proper operation, it is recommended that the last dimmer in the system includes termination for the DMX signal line. This termination is nothing more than a 120 ohm resistor installed across pins 2 and 3 of the 5 pin XLR.