CLAY PAKY ALPHA PROFILE 1500 [80% New]

These CLAY PAKY ALPHA PROFILE 1500 units were purchased in 2013 and have seen minimal use since then. 

They come with individual flight cases. The lights have been regularly maintained, though there are some scratches on their outer shells. 

The interior retains all original parts, but there is some dust inside. The flight cases also have some scratches, and a some latches are damaged.

1500W CMY+CTO  Mixing with 11°-74° Zoom

=====Details=====

The Alpha Profile 1500 is a cutting-edge professional beam shaper that combines the high output power of a 1500 W lamp with an exclusive framing system (patented) capable of any shape. It features an astonishing 1:9 ratio zoom, with a breathtaking speed, that makes it suitable to both short and long distance applications. by Clay Paky.

It is extremely bright, very silent and has advanced electronics and software. It comes with a comprehensive range of graphic effects, the innovative Stay-Sharp-Zoom function allowing automatic focusing and the smart Zoom-Tracking-Diffuser for a linear beam softening. The Alpha Profile 1500 is a valuable resource for designers working in demanding lighting environments.

POWER SUPPLIES

200-240V 50/60Hz

INPUT POWER

Wash: 2000VA at 230 V 50 Hz (PFC electronic ballast)
Strobo: 3000VA

LAMP SOURCE

Wash: 1500W discharge lamp
- Type HTI 1500W/60/P50-L Lok-it Osram
- Cap PGJ50
- Colour temperature 6,000 K
- Luminous flux 135,000 lm
- Average life 750 h

Strobe: pulsed Xenon 1500W lamp (x2)
- Type ER 9902 CPY [H]
- Average life 500 h

OPTICS

Wash:
- Elliptic reflector with high luminous efficiency
- Electronic Zoom 11°-74°
- Diffuser lens (11° to 13°; Linear to 74°)
Strobe:
- Special shape mirror reflector

COLOR SYSTEM

- CMY Color Mixing + linear CTO
- 2 color wheels, each with 6 pure and selected color filters
- CTO and CTB filters on the color wheels

EFFECTS SECTION

wash:
- 1 frost filter
- Indexable beam shaper
- "Diamond Effect" rotating filter
- Hybrid 0-100% dimmer (electronic + mechanical)
- Stop/strobe effect

CONTROL AND PROGRAMMING

Max 29 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.

MOVING BODY

Travel:
- PAN = 540°
- TILT = 252°
Maximum speeds:
- PAN = 4.0 sec (360°)
- TILT = 3.2 sec (252°)
Resolution:
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

ELECTRONICS

Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
ETHERNET Ready.
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.

WORKING POSITION

Working in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.

WEIGHT

46,5 Kg (102 lbs, 5 oz)