DESCRIPTION

Wybron’s RAM power supplies work with the entire
family of
Coloram II color changers, CXI color mixers, Eclipse and
Eclipse II
mechanical dowsers and Goboram II gobo rotators. They come
in three
different sizes rated for 6, 12, and 24 heads.

Each model uses a
universal switching power source so the units can
be used anywhere in
the world without setting a voltage or frequency
switch. However, fuses
should be changed when switching between 120
and 240 volts.

Each power supply communicates with its lighting devices via DMX512
and uses a block of addresses that can be started anywhere in the
address space. Each model can remotely configure the units attached to
it.
If the fan is variable speed, then it can be set from
the power
supply. In addition, diagnostic information about the
motor, local
voltage, and fan speed is available at the front panel
of each power
supply.

All models come with hanging brackets and safety cables for mounting
on trusses. Rack mounting kits are available for the 24-way power
supply, allowing two of these models in 3U space of a standard 19-inch
equipment rack. Connecting heads to the power supply requires a
specially designed cable with two 14-gauge conductors and one shielded
pair for signal. These cables come in a variety of standard lengths or
can be made to the customer’s desired length.

A single 24-way/12-way/6-way power supply operates:

24/12/6 Coloram II color changers
12/6/3 CXI color mixers
16/8/4 Goboram II gobo changers
24/12/6 Eclipse dowsers

or these combinations:

24-way: 12 Coloram II color changers/8 Goboram II gobo changers
12-way: 6 Coloram II color changers/4 Goboram II gobo changers
6-way: 3 Coloram II color changers/2 Goboram II gobo changers