GearSource

C208 Line Array Loudspeaker Cabinet

$4,500.00 $4,500.00

The C-208 is the perfect combination of ease of use, power efficiency and excellent sound quality. Each enclosure is constructed of high grade birch ply-wood and is custom fitted with industry standard steel fly hardware. Our hardware is built to be user friendly in both flown array and ground stacking applications. All of our hardware has been built and tested at a 10:1 static load factor allowing users to fly up to 16 C-208 line array elements on a single hang using our "A1" fly bar.

Our entire line array selection is hand wired using premium 14 gauge wiring. All of our drivers are built using a durable cast fame basket designed for longevity. Our compression drivers are built using replaceable titanium diaphragms for superb sound quality and performance. We use a standard phase plug to control the isophasic wave form as well as wave guide on many of our models. Our components have proven track record on tours ranging from stadiums to festivals of up to 30 shows per month with practically a nonexistent failure rate.

All C-110 enclosures are equipped with a removable back panel where the NL8 input/output connector is located. This back panel can be disconnected from the internal multi pin connector and quickly removed. In place of the passive back panel, our customers have the option to purchase and install our 3 channel digital switching amplifier module. The module can be quickly and easily connected, allowing for a seamless conversion from non-powered to a self powered array system. Each power amplifier module is capable of powering itself and one additional non-powered C-208 line array enclosures in tri-amp mode. The module is connected to the passive enclosure with a Neutrik NL8 connector. Each amplifier module is powered by "ICE" and offers an integrated active crossover system along with DSP correction that has been fine tuned in an anechoic chamber to provide the user with chambered flat response

As stated prior, the C-208 operates in tri-amp mode in which the C-208 enclosure is wired at 8 ohm for each mid frequency and 16 ohm for the high frequency component. In this mode (pin +1/-1) carries signal for mid-frequency one, (pin +2/-2) for the mid-frequency two and (pin +3/-3) carries signal for the high frequency. An external crossover is needed to separate the frequency range on all non-powered C-208 enclosures.

We pride ourselves in our product and service. TVi line array enclosures are conservatively rated. We test our products stringently and market them conservatively so that when the end user receives the product it amazes them every time. Our end goal is to offer our customers a product that will outperform our competitor's product watt for watt every time, without exceptions! Look no further, talk to our customers & experience the revolution!

1 Available:   0 New | 1 Used

View Listings:
C208 Line Array Loudspeaker Cabinet

C208 Line Array Loudspeaker Cabinet

ID: 110963  
Condition: Good   
Warranty: 48 Hours
1 Available
C208 Line Array Loudspeaker Cabinet

C208 Line Array Loudspeaker Cabinet

ID: 110963  
Condition: Good   
Warranty: 48 Hours
1 Available

DESCRIPTION

The C-208 is the perfect combination of ease of use, power efficiency
and excellent sound quality. Each enclosure is constructed of high
grade
birch ply-wood and is custom fitted with industry
standard steel fly hardware.
Our hardware is built to be
user friendly in both flown array and ground
stacking
applications. All of our hardware has been built and tested at a
10:1 static load factor allowing users to fly up to 16 C-208 line
array elements
on a single hang using our "A1"
fly bar.

Our entire line array selection is hand wired using premium 14 gauge
wiring.
All of our drivers are built using a durable cast
fame basket designed for
longevity. Our compression drivers
are built using replaceable titanium diaphragms
for superb
sound quality and performance. We use a standard phase plug to control
the isophasic wave form as well as wave guide on many of our models.
Our components
have proven track record on tours ranging
from stadiums to festivals of up to 30
shows per month with
practically a nonexistent failure rate.

All C-110 enclosures are equipped with a removable back panel where
the NL8
input/output connector is located. This back panel
can be disconnected from
the internal multi pin connector
and quickly removed. In place of the passive
back panel,
our customers have the option to purchase and install our 3 channel
digital switching amplifier module. The module can be quickly and
easily connected,
allowing for a seamless conversion from
non-powered to a self powered array system.
Each power
amplifier module is capable of powering itself and one additional
non-powered
C-208 line array enclosures in tri-amp mode.
The module is connected to the passive
enclosure with a
Neutrik NL8 connector. Each amplifier module is powered by
"ICE"
and offers an integrated active crossover
system along with DSP correction that has
been fine tuned
in an anechoic chamber to provide the user with chambered flat response

As stated prior, the C-208 operates in tri-amp mode in which the
C-208 enclosure
is wired at 8 ohm for each mid frequency
and 16 ohm for the high frequency component.
In this mode
(pin +1/-1) carries signal for mid-frequency one, (pin +2/-2) for the
mid-frequency two and (pin +3/-3) carries signal for the high
frequency. An external
crossover is needed to separate the
frequency range on all non-powered C-208 enclosures.

We pride ourselves in our product and service. TVi line array
enclosures are conservatively
rated. We test our products
stringently and market them conservatively so that when the
end user receives the product it amazes them every time. Our end goal
is to offer our
customers a product that will outperform
our competitor’s product watt for watt every
time, without
exceptions! Look no further, talk to our customers & experience
the revolution!