GearSource

SR40 Roof System

$244,127.81 $244,127.81

The Saddle Roofs are designed to be set up on single steel bases which can be connected with a compression beam which reduces the ballast requirements or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings and Side Houses are available.

The SR40 Roof consist of a ST Ground Support on six TD35 Towers and a Roof Structure 0f ST Truss.

The SR40 Roof is a tower based structure with a saddle roof. These saddle roofs have a standard impressive load bearing ST Main Rig and the gable and have a fixed angle which enables you to re-build the roof in various dimensions. The standard SR40 ST Roofs are available in 20x14m, 18x14m, 16x12m and 14x12m all on six TD35 Towers. The 20x14m and 18x14m roofs have an additional center back tower to enhance the load bearing capacity and maintain the required clearance.

1 Available:   0 New | 1 Used

Brands : Eurotruss  

Product categories : Complete Stages & Packages  

Stock Categories : Complete Stages & Packages  Staging  Staging, Trussing & Rigging  

Stock Brands : Eurotruss  

2015 SR40 14x18M Stage

ID: 98230  
Condition: Good   
Warranty: 48 Hours

1 Available

DESCRIPTION

The Saddle Roofs are designed to be set up on single steel bases which can be connected with a compression beam which reduces the ballast requirements or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings and Side Houses are available.

The SR40 Roof consist of a ST Ground Support on six TD35 Towers and a Roof Structure 0f ST Truss.

The SR40 Roof is a tower based structure with a saddle roof. These saddle roofs have a standard impressive load bearing ST Main Rig and the gable and have a fixed angle which enables you to re-build the roof in various dimensions. The standard SR40 ST Roofs are available in 20x14m, 18x14m, 16x12m and 14x12m all on six TD35 Towers. The 20x14m and 18x14m roofs have an additional center back tower to enhance the load bearing capacity and maintain the required clearance.