GearSource

XP 2016a External Processor

PlaceholderPlaceholder

The XP 2016a is an optional external processor designed specifically for use with the MP 2016a. The XP 2016a is intended to mount above or below the MP 2016a. It connects with a single 10-inch ribbon cable and is engaged with the flip of a switch on the MP 2016a front panel. If an XP 2016a is not connected, the XP 2016a engage switch on the MP 2016a has no effect. The XP 2016a provides dedicated Accelerated-Slope, 3-band, full-cut tone controls for each of the six stereo Input channels, A-Post-B Crossfader Assign switches for all six Input channels, a high-performance Active Crossfader™ with full range Contour control, and a stereo 10-segment peak dBu Master/Cue Meter with peak hold. The six stereo, post Mix Level signals in the MP 2016a are fed to the XP 2016a. When the XP 2016a is not engaged, the post Mix Level signals go directly to the Master Mix in the MP 2016a. When the XP 2016a is engaged, the stereo Master Mix comes from the XP 2016a. If all Input channels on the XP 2016a are assigned Post-Crossfader, the Mix will be identical to the MP 2016a (with the addition of tone controls for each Input channel). For Crossfader control, simply assign a channel to the A or B side of the Crossfader. The Active Crossfader features a full-range Contour control for smooth blending or ultra fast cuts. The Master/Cue Meter follows the source selection of the headphone monitor on the MP 2016a. If Master is selected, the XP 2016a Meter monitors the pre-house-level Master signal. If Cue is selected, the XP 2016a meter monitors the Cue Source. The XP 2016a matches the MP 2016a ergonomics, packaged in a compact 19 inch, 3U rack mount chassis, 5 inches deep.

No Listings Available

Stock Brands : Rane  

No Listings Available

DESCRIPTION

The XP 2016a is an optional external processor designed specifically for
use with the MP 2016a. The XP 2016a is intended to mount above or below
the MP 2016a. It connects with a single 10-inch ribbon cable and is
engaged with the flip of a switch on the MP 2016a front panel. If an XP
2016a is not connected, the XP 2016a engage switch on the MP 2016a has
no effect.
The XP 2016a provides dedicated Accelerated-Slope, 3-band,
full-cut tone controls for each of the six stereo Input channels,
A-Post-B Crossfader Assign switches for all six Input channels, a
high-performance Active Crossfader™ with full range Contour control, and
a stereo 10-segment peak dBu Master/Cue Meter with peak hold.
The six
stereo, post Mix Level signals in the MP 2016a are fed to the XP 2016a.
When the XP 2016a is not engaged, the post Mix Level signals go directly
to the Master Mix in the MP 2016a. When the XP 2016a is engaged, the
stereo Master Mix comes from the XP 2016a.
If all Input channels on the
XP 2016a are assigned Post-Crossfader, the Mix will be identical to the
MP 2016a (with the addition of tone controls for each Input channel).
For Crossfader control, simply assign a channel to the A or B side of
the Crossfader. The Active Crossfader features a full-range Contour
control for smooth blending or ultra fast cuts.
The Master/Cue Meter
follows the source selection of the headphone monitor on the MP 2016a.
If Master is selected, the XP 2016a Meter monitors the pre-house-level
Master signal. If Cue is selected, the XP 2016a meter monitors the Cue
Source.
The XP 2016a matches the MP 2016a ergonomics, packaged in a
compact 19 inch, 3U rack mount chassis, 5 inches deep.