GearSource

DVS 10P Loudspeaker

$2,730.52 $2,730.52

DVS 10 is a compact 2-way wide-range loudspeaker system with passive low-loss crossover with built-in overload protection. It comprises a 25cm high power handling woofer for low and mid frequencies, and a 1” compression driver for high frequencies, ferrofluid cooled and loaded with a controlled directivity horn enabling the enclosure to be used in either a vertical or a horizontal position. It can be used along with a DVS 115/118 SW reflex subwoofer system, when the sound to be reinforced features considerable low frequency content, as is normally the case with live music and dance club applications. The DVS 10 system has phase inversion low frequency loading and a tuned enclosure. The system’s uniform directivity from 500Hz to 4kHz has an average dispersion of 100° horizontal and 117° vertical and average wide-range sound coverage from 500 Hz to 10 KHz is 100° horizontal and 100° vertical. The acoustic reproduced bandwidth is 48 Hz to 18 kHz at -10 dB.

The frequency response of the complete system is +/-3dB from 55 Hz to 17 kHz. Flown in free-field it has high average wide-range sensitivity, producing 93 dB SPL 1W/1m, (131.5dB SPL peak). The maximum allowed power is 350 Watt AES (1.400 peak).

The enclosure cabinet has a trapezoidal shape and is built by high quality 15 mm. baltic phenolic glued plywood further strengthened by bracing glued inside, which also eliminates any resonance of the sides while the outer finish is in scratch-resistant, waterproof black paint.

The cabinet has two M8 threaded mounting points to facilitate both vertical and horizontal flying by means of the appropriate optional accessories, and other two points to which an adaptor can be fitted for use with an (optional) tripod stand. The top panel is fitted with a steel receptacle that contains a plug (supplied) for aligning an enclosure mounted above (horn to horn), in long-throw configuration (“Stack Align” system). The snap-mounting protective front grille is made from painted steel mesh.

1 Available:   0 New | 1 Used

Stock Brands : Outline  

View Listings:

Lot of 2 - DVS 10SP Loudspeaker

ID: 103941  
Condition: Good   
Warranty: 48 Hours
1 Available

Lot of 2 - DVS 10SP Loudspeaker

ID: 103941  
Condition: Good   
Warranty: 48 Hours
1 Available

DESCRIPTION

DVS 10 is a compact 2-way wide-range loudspeaker system with passive low-loss crossover with built-in overload protection. It comprises a 25cm high power handling woofer for low and mid frequencies, and a 1” compression driver for high frequencies, ferrofluid cooled and loaded with a controlled directivity horn enabling the enclosure to be used in either a vertical or a horizontal position. It can be used along with a DVS 115/118 SW reflex subwoofer system, when the sound to be reinforced features considerable low frequency content, as is normally the case with live music and dance club applications. The DVS 10 system has phase inversion low frequency loading and a tuned enclosure. The system’s uniform directivity from 500Hz to 4kHz has an average dispersion of 100° horizontal and 117° vertical and average wide-range sound coverage from 500 Hz to 10 KHz is 100° horizontal and 100° vertical. The acoustic reproduced bandwidth is 48 Hz to 18 kHz at -10 dB.

The frequency response of the complete system is +/-3dB from 55 Hz to 17 kHz. Flown in free-field it has high average wide-range sensitivity, producing 93 dB SPL 1W/1m, (131.5dB SPL peak). The maximum allowed power is 350 Watt AES (1.400 peak).

The enclosure cabinet has a trapezoidal shape and is built by high quality 15 mm. baltic phenolic glued plywood further strengthened by bracing glued inside, which also eliminates any resonance of the sides while the outer finish is in scratch-resistant, waterproof black paint.

The cabinet has two M8 threaded mounting points to facilitate both vertical and horizontal flying by means of the appropriate optional accessories, and other two points to which an adaptor can be fitted for use with an (optional) tripod stand. The top panel is fitted with a steel receptacle that contains a plug (supplied) for aligning an enclosure mounted above (horn to horn), in long-throw configuration (“Stack Align” system). The snap-mounting protective front grille is made from painted steel mesh.