GearSource

PS10AMP Dedicated Amplifier

The PS10AMP is a dedicated amplifier that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages. The integrated PS10 TDcontroller provides crossover, sensed amplifier control and system equalization optimized for the PS10 and LS500.

Like all NEXO processors, the PS10AMP provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalizers (VCEQs), reducing levels only at frequencies when and where necessary.

Each PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out. The PS10AMP Configuration switch automatically configures the unit for 2-channel mode (LSub Off), where the PS10AMP drives 2x to 4x PS10 Loudspeakers in stereo (2x 850Watts/4O) or 3-channel mode (Lsub On), where the PS10 AMP drives 2x PS10 loudspeakers in stereo (2x 430Watts/8O) and 1x LS500 Subwoofer (850W/4O) with a summed mono signal of the L+R input signals. Because the Configuration switch also rewires the output connectors and displays PS10AMP mode status with LED indicators, the PS10AMP minimizes installation cost and complexity while ensuring faultless performance.

No Listings Available

Stock Categories : Amplification  

Stock Brands : Nexo  

No Listings Available

DESCRIPTION

The PS10AMP is a dedicated amplifier that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages. The integrated PS10 TDcontroller provides crossover, sensed amplifier control and system equalization optimized for the PS10 and LS500.

Like all NEXO processors, the PS10AMP provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalizers (VCEQs), reducing levels only at frequencies when and where necessary.

Each PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out. The PS10AMP Configuration switch automatically configures the unit for 2-channel mode (LSub Off), where the PS10AMP drives 2x to 4x PS10 Loudspeakers in stereo (2x 850Watts/4O) or 3-channel mode (Lsub On), where the PS10 AMP drives 2x PS10 loudspeakers in stereo (2x 430Watts/8O) and 1x LS500 Subwoofer (850W/4O) with a summed mono signal of the L+R input signals. Because the Configuration switch also rewires the output connectors and displays PS10AMP mode status with LED indicators, the PS10AMP minimizes installation cost and complexity while ensuring faultless performance.