GearSource

32×8 Audio Snake

$3,000.00 $6,950.00

The VIS-1832 is normally used in connection with the VIM-1832 or VIM-MY32 YGDAI cards to achieve a 32×8 fiber-optic transport system. The VIS-1832 / VIM-1832 or VIM-MY32 system is normally used as a transport for STAGE to FOH, with or without splits. This device contains 32 mic/line inputs (sends) and 8 analog line level outputs (returns). There is a 3 position gain switch for each input that sets the gain of the mic-pre. The normal settings for these switches are as follows: 0 = line level, 26 = mic level, 12 = high transient / very “hot” mic level. Each input has an associated LED indicator which begins flashing red 3dB before clipping. There are 4 +48v phantom power on/off switches with associated on/off LED indicators. Phantom power is applied in groups of 8 inputs.

The VIS-1832 is supplied with a pair of transmit/receive LC fiber connectors (other connector types possible). Two optical splits are come standard. These splits (transmit only) are presented on single LC connectors. The VIS-1832 will operate at 48k or 96k. There is a “sync” status LED on the front (top) of the unit. This LED will be solid green when in sync, flashing red and green while looking for sync, and solid red when no sync is present.

The “control” connection is a TTL data port which appears on an EtherCon® connector. It allows LightViper accessory devices such as the DMX4o (DMX lighting control) or MD3 (RS422/232/MIDI) to be connected to the unit. The EtherCon® output of the DMX4i or RJ45 on the MD-3 is input to the VIM-1832 via the “control” EtherCon® connector, combined with the audio input data, and transported via fiber to the VIS-1832. This data is then output from the “control” EtherCon® connector on the VIS-1832 and input into a DMXo or MD-3, where the TTL data is translated back into the original format. AC power is via Neutrik PowerCon® connector. The VIS-1832 has an available rack mount kit (VER-1832) as well as a 19” rack mount chassis version (VRK-1832). The unit can operate at any voltage 50-60Hz, 90-250v AC.

2 Available:   0 New | 2 Used

Stock Categories : Cables & Connectors  More  Snake Cables  

View Listings:

32x8 Audio Snake

ID: 156601  
Condition: Excellent   
Warranty: Factory

1 Available

FiberPlex 64x16 3 Way Fiber Split Snake

ID: 156529  
Condition: Good   
Warranty: Factory

1 Available

32x8 Audio Snake

ID: 156601  
Condition: Excellent   
Warranty: Factory

1 Available

FiberPlex 64x16 3 Way Fiber Split Snake

ID: 156529  
Condition: Good   
Warranty: Factory

1 Available

DESCRIPTION

The VIS-1832 is normally used in connection with the VIM-1832 or VIM-MY32 YGDAI cards to achieve a 32×8 fiber-optic transport system. The VIS-1832 / VIM-1832 or VIM-MY32 system is normally used as a transport for STAGE to FOH, with or without splits. This device contains 32 mic/line inputs (sends) and 8 analog line level outputs (returns). There is a 3 position gain switch for each input that sets the gain of the mic-pre. The normal settings for these switches are as follows: 0 = line level, 26 = mic level, 12 = high transient / very “hot” mic level. Each input has an associated LED indicator which begins flashing red 3dB before clipping. There are 4 +48v phantom power on/off switches with associated on/off LED indicators. Phantom power is applied in groups of 8 inputs.

The VIS-1832 is supplied with a pair of transmit/receive LC fiber connectors (other connector types possible). Two optical splits are come standard. These splits (transmit only) are presented on single LC connectors. The VIS-1832 will operate at 48k or 96k. There is a “sync” status LED on the front (top) of the unit. This LED will be solid green when in sync, flashing red and green while looking for sync, and solid red when no sync is present.

The “control” connection is a TTL data port which appears on an EtherCon® connector. It allows LightViper accessory devices such as the DMX4o (DMX lighting control) or MD3 (RS422/232/MIDI) to be connected to the unit. The EtherCon® output of the DMX4i or RJ45 on the MD-3 is input to the VIM-1832 via the “control” EtherCon® connector, combined with the audio input data, and transported via fiber to the VIS-1832. This data is then output from the “control” EtherCon® connector on the VIS-1832 and input into a DMXo or MD-3, where the TTL data is translated back into the original format. AC power is via Neutrik PowerCon® connector. The VIS-1832 has an available rack mount kit (VER-1832) as well as a 19” rack mount chassis version (VRK-1832). The unit can operate at any voltage 50-60Hz, 90-250v AC.