GearSource

dmXLAN Node 1

$236.66 $236.66

The dmXLAN Node 1 is an Ethernet node allowing the conversion to Ethernet (Artnet protocol) of one DMX universe, input or output. For fixed installations, such as theatres or conference centres, the cabinet will be mounted on the wall, with the display in front and the DMX connector pointing downwards, avoiding the risk of connectors and cables getting in the way of feet or flightcases, etc. The Ethernet is connected internally through hardwire connection. In the truss-mount version, an Ethercon connector from Neutrik is placed beside the DMX socket. The cabinet is fitted with a built-in M10 nut on the bottom for a truss clamp and a hole is provided for the safety hook. In both cases, the 5-pin XLR connector can be set up as a DMX input or output. Node1 is powered through the Ethernet cable, as specified by the IEEE 802.3 standard.

1 Available:   0 New | 1 Used

Stock Brands : Leprecon  

View Listings:

ELC dmXLAN Node 1 mkII

ID: 159925  
Condition: Good   
Warranty: 48 Hours
1 Available

ELC dmXLAN Node 1 mkII

ID: 159925  
Condition: Good   
Warranty: 48 Hours
1 Available

DESCRIPTION

The dmXLAN Node 1 is an Ethernet node allowing the conversion to
Ethernet (Artnet protocol) of one DMX universe, input or output. For
fixed installations, such as theatres or conference centres, the
cabinet will be mounted on the wall, with the display in front and the
DMX connector pointing downwards, avoiding the risk of connectors and
cables getting in the way of feet or flightcases, etc. The Ethernet is
connected internally through hardwire connection. In the truss-mount
version, an Ethercon connector from Neutrik is placed beside the DMX
socket. The cabinet is fitted with a built-in M10 nut on the bottom
for a truss clamp and a hole is provided for the safety hook. In both
cases, the 5-pin XLR connector can be set up as a DMX input or output.
Node1 is powered through the Ethernet cable, as specified by the IEEE
802.3 standard.