GearSource

DN9848E System Controller

The digital system controller has been one of the fastest developing areas of signal processing in recent years. This is principally because it allows designers to combine a number of key control functions within a single device, thereby lowering overall costs and adding convenience. Unfortunately, in many cases the relevance of the audio performance of the device has been overshadowed by the ‘bells and whistles’ functionality of the unit, ultimately somewhat defeating the object of the exercise. With the new Klark Teknik Helix DN9848E system controller, no compromise has been made in either the feature set or the audio performance.

The Helix DN9848E brings a new level of flexibility to system control whether for live production or installation use. Since there is no preset routing within the device, it can be easily preprogrammed to perform almost any system-control task. Limiters and compressors on all outputs plus compressors on all inputs provide ultimate speaker control and protection, whilst no less than ninety-six bands of fully parametric EQ allow for both room and system equalisation. Best of all, there’s enough processing power onboard to allow every function to be available all the time, regardless of what is already in use.

The DN9848E System Controller features AES/EBU digital inputs as standard. Whilst the internal sample rate of the DN9848E unit remains at 48kHz, these digital connections are all 96 kHz compatible allowing easy interface with any other digital device featuring the higher sample rate. The unit now features a dual port Ethernet communications interface. This is to facilitate much faster communication, response and metering when controlling multiple units, than was previously possible with serial comms.

The DN9848E incorporates some customer-requested operational additions. The user-configurability of the unit includes full matrix mixing capability between inputs and outputs, providing an unequalled level of flexibility. Whilst programming, inputs or outputs can now be ‘ganged’ so that the user can enter program data into one input or output menu and all connected inputs or outputs will be simultaneously updated. Input and output parameters can also be copied from one to another. The internal memory structure has also been revised such that it is now possible to back up the RAM-based system memories into non-volatile flash memory.

The proprietary ELGAR software coupled with Helix System Controller Remote Control Software (RCS) Add-In allows simple up-and-down-loading of system parameters into the FLASH memory locations, as well as storage and transmission of system information.

Should for example you need a new system configuration to be loaded into a unit on the other side of the world? No problem, simply email the ELGAR file to wherever it needs to go, it can then be uploaded into the unit in seconds.

No Listings Available

Stock Brands : Klark Teknik  

No Listings Available

DESCRIPTION

The digital system controller has been one of the fastest developing
areas of signal processing in recent years. This is principally
because
it allows designers to combine a number of key control
functions within a
single device, thereby lowering overall costs and
adding convenience.
Unfortunately, in many cases the relevance of the
audio performance of
the device has been overshadowed by the ‘bells
and whistles’
functionality of the unit, ultimately somewhat
defeating the object of
the exercise. With the new Klark Teknik Helix
DN9848E system controller,
no compromise has been made in either the
feature set or the audio
performance.

The Helix DN9848E brings a new level of flexibility to system
control whether for live production or installation use. Since there
is
no preset routing within the device, it can be easily
preprogrammed to
perform almost any system-control task. Limiters and
compressors on all
outputs plus compressors on all inputs provide
ultimate speaker control
and protection, whilst no less than
ninety-six bands of fully parametric
EQ allow for both room and
system equalisation. Best of all, there’s
enough processing power
onboard to allow every function to be available
all the time,
regardless of what is already in use.

The DN9848E System Controller features AES/EBU digital inputs
as
standard. Whilst the internal sample rate of the DN9848E unit remains
at 48kHz, these digital connections are all 96 kHz compatible allowing
easy interface with any other digital device featuring the higher
sample
rate. The unit now features a dual port Ethernet
communications
interface. This is to facilitate much faster
communication, response and
metering when controlling multiple units,
than was previously possible
with serial comms.

The DN9848E incorporates some customer-requested operational
additions. The user-configurability of the unit includes full matrix
mixing capability between inputs and outputs, providing an unequalled
level of flexibility. Whilst programming, inputs or outputs can now be
‘ganged’ so that the user can enter program data into one input or
output menu and all connected inputs or outputs will be simultaneously
updated. Input and output parameters can also be copied from one to
another. The internal memory structure has also been revised such that
it is now possible to back up the RAM-based system memories into
non-volatile flash memory.

The proprietary ELGAR software coupled with Helix System
Controller
Remote Control Software (RCS) Add-In allows simple
up-and-down-loading of system parameters into the FLASH memory
locations, as well as storage and transmission of system information.

Should for example you need a new system configuration to be
loaded
into a unit on the other side of the world? No problem, simply
email
the ELGAR file to wherever it needs to go, it can then be uploaded
into the unit in seconds.