GearSource

Xlc127+ Line-Array Element

$8,000.00 $10,649.70
PlaceholderPlaceholder

The Xlc127+ loudspeaker is a component used in multiples to create a XLC line array. An XLC array can use a minimum of four cabinets, and a reasonable array uses six to eight boxes, with a maximum of 16 for larger arenas. The three-way, axis-asymmetric design includes a single EV DL-12 low-frequency, mid-bass woofer optimized for this cabinet. Two 6.5-inch, horn-loaded drivers in a vertical array comprise the mid-frequency bandpass. The XLC127+ uses two ND6 (three-inch voice-coil) neodymium compression drivers loaded on two Hydra™ plane wave generators. With a horizontal coverage of 120 degrees, the XLC system accurately covers wide areas while maintaining excellent imaging and lobe-free coverage. The XLC127+ is equipped with an internal x-over for mid-bass and high-frequency to allow for either biamp or triamp operation.

7 Available:   0 New | 7 Used

Stock Brands : Electrovoice  

View Listings:

Lot of 6 Xlc127+ Line-Array and Amp Rack

ID: 136337  
Condition: Fair   
Warranty: 30 Days
1 Available

Stack of (4) Xlc127+ Line-Array Element

ID: 94479  
Condition: Good   
Warranty: 48 Hours
6 Available

Lot of 6 Xlc127+ Line-Array and Amp Rack

ID: 136337  
Condition: Fair   
Warranty: 30 Days
1 Available

Stack of (4) Xlc127+ Line-Array Element

ID: 94479  
Condition: Good   
Warranty: 48 Hours
6 Available

DESCRIPTION

The Xlc127+ loudspeaker is a component used in multiples to create a
XLC line array.
An XLC array can use a minimum of four cabinets, and
a reasonable array uses six to eight boxes, with a maximum of 16 for
larger arenas. The three-way, axis-asymmetric design includes a single
EV DL-12 low-frequency, mid-bass woofer optimized for this cabinet.
Two 6.5-inch, horn-loaded drivers in a vertical array comprise the
mid-frequency bandpass.
The XLC127+ uses two ND6 (three-inch
voice-coil) neodymium compression drivers loaded on two Hydra™ plane
wave generators. With a horizontal coverage of 120 degrees, the XLC
system accurately covers wide areas while maintaining excellent
imaging and lobe-free coverage. The XLC127+ is equipped with an
internal x-over for mid-bass and high-frequency to allow for either
biamp or triamp operation.