GearSource

Cobra-Top

$2,721.59 $2,721.59

DYNACORD´s COBRA-TOP is a 3-Way cabinet for use in compact line arrays and other demanding applications where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.

The mid-range of the COBRA-TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations. Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-TOP uses a dual vented direct-radiator design equipped with an Electro-Voice EVX 155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.

1 Available:   0 New | 1 Used

Stock Brands : Dynacord  

View Listings:

Complete Rigging System for Dynacord Cobra

ID: 107655  
Condition: Excellent   
Warranty: Factory
1 Available

Complete Rigging System for Dynacord Cobra

ID: 107655  
Condition: Excellent   
Warranty: Factory
1 Available

DESCRIPTION

DYNACORD´s COBRA-TOP is a 3-Way cabinet for use in
compact
line arrays and other demanding applications where wide
horizontal coverage, extremely low distortion and a low
sensitivity
against acoustic feedback are mandatory.

The mid-range of the COBRA-TOP uses selected DYNACORD C8 cone
transducers in a line array configuration. The C8 transducers show
significantly lower distortion than typical horn/compression driver
combinations. Therefore an extremely natural sound quality over
large
distances can be achieved. For the high frequencies of the
COBRA-TOP an
Electro-Voice DH2T titanium diaphragm driver and a
HPT94 constant
directivity horn are used in order to prevent any
set-up and adjustment
problems for the main direction and the near
field. The DYNACORD
COBRA-TOP uses a dual vented direct-radiator
design equipped with an
Electro-Voice EVX 155 for the low
frequencies. For Near-Fill and
Side-Fill applications and for the
reinforcement of speech the COBRA-TOP
cabinets can be used
fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE
COIL
TRACKING PROTECTION. This circuit senses the terminal voltage
of the
transducers and simulates the thermal behaviour of the
transducer voice
coils. In case of potential thermal overload the
power applied to the
speakers is reduced to a safe level. Power
amps up to 1200W/8Ohms can be
used in order to have maximum dynamic
range without the danger of
thermal overload in non-controlled
situations. The VOICE COIL TRACKING
PROTECTION exhibits “soft”
switching characteristics, so no annoying
clicks or pops are
audible. The circuitry automatically resets after the
voice coil
temperatures have reached a safe value.