GearSource

Cobra 4 Top Loudspeaker Cabinet

$3,287.21 $3,287.21

COBRA-4-TOP is an active 3-Way cabinet for use as a nearfield cabinet in compact line arrays and other demanding applications, where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.

Depending on the application, the COBRA-4-TOP cabinet can be used up to 40m throw distance. The mid-range of the COBRA-4- TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations.

Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-4-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-4-TOP uses a dual vented direct- radiator design equipped with an Electro-Voice EVX155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-4-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.

4 Available:   0 New | 4 Used

Stock Brands : Dynacord  

View Listings:

Cobra Top

ID: 104210  
Condition: Excellent   
Warranty: 30 Days
4 Available

Cobra Top

ID: 104210  
Condition: Excellent   
Warranty: 30 Days
4 Available

DESCRIPTION

COBRA-4-TOP is an active 3-Way cabinet for use as a nearfield
cabinet in compact line arrays and other demanding applications,
where wide horizontal coverage, extremely low distortion and a low
sensitivity against acoustic feedback are mandatory.

Depending on the application, the COBRA-4-TOP cabinet can be used up
to 40m throw distance. The mid-range of the COBRA-4- TOP uses selected
DYNACORD C8 cone transducers in a line array configuration. The C8
transducers show significantly lower distortion than typical
horn/compression driver combinations.

Therefore an extremely natural sound quality over large distances can
be achieved. For the high frequencies of the COBRA-4-TOP an
Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant
directivity horn are used in order to prevent any set-up and
adjustment problems for the main direction and the near field. The
DYNACORD COBRA-4-TOP uses a dual vented direct- radiator design
equipped with an Electro-Voice EVX155 for the low frequencies. For
Near-Fill and Side-Fill applications and for the reinforcement of
speech the COBRA-4-TOP cabinets can be used fullrange without any problems.

The cabinet is equipped with an electronic circuit called VOICE COIL
TRACKING PROTECTION. This circuit senses the terminal voltage of the
transducers and simulates the thermal behaviour of the transducer
voice coils. In case of potential thermal overload the power applied
to the speakers is reduced to a safe level. Power amps up to
1200W/8Ohms can be used in order to have maximum dynamic range without
the danger of thermal overload in non-controlled situations. The VOICE
COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so
no annoying clicks or pops are audible. The circuitry automatically
resets after the voice coil temperatures have reached a safe value.