GearSource

J12 Loudspeaker

$5,972.12 $5,972.12

The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flown vertical columns of up to twenty-four loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 120° horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J12 is acoustically and mechanically compatible to the J8 loudspeaker. It can be used in columns of purely J12 loudspeakers or combined with J8s and / or with J-SUBs. The J12 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, the side and rear panels incorporate four handles, and two EP5 or NL8 connectors wired in parallel are also mounted at the rear.

20 Available:   0 New | 20 Used

View Listings:

J8-J12 Line Array Module

ID: 125888  
Condition: Good   
Warranty: 48 Hours
20 Available

J8-J12 Line Array Module

ID: 125888  
Condition: Good   
Warranty: 48 Hours
20 Available

DESCRIPTION

The J12 is a 3-way design housing 2 x 12" LF
drivers, one
hornloaded 10" MF driver and
two 1.4" exit HF compression
drivers with 3" voicecoils mounted to a dedicated wave-shaping
device.
The mechanical and
acoustical design enables flown vertical
columns of
up to twenty-four loudspeakers to be
suspended using
vertical splay
angles between them of 0° to 7° with a 1° resolution.
The cylindrical
wave segments produced couple coherently in the
vertical
plane. Due to
the dipolar arrangement of the neodymium LF
drivers the exceptional 120°
horizontal
constant directivity
dispersion control is nominally
maintained down to 250 Hz.
The J12
is acoustically and mechanically
compatible to the J8 loudspeaker. It
can be used in columns of purely
J12 loudspeakers or combined with
J8s and / or with J-SUBs. The J12
cabinet is constructed from marine
plywood and has an impact and weather
protected PCP
(Polyurea
Cabinet Protection) finish.
The front of the
loudspeaker cabinet is
protected by a rigid metal grill, the side and
rear
panels
incorporate four handles, and two EP5 or NL8 connectors
wired in
parallel are also
mounted at the rear.