The leader in our line of hoist controls, the CS-800 enables eight chain motors to be run individually or in unison. Both power distribution and relay control for the hoists reside in the same compact unit.

The basic design runs 3 phase motors at 208V-220V. The 50 amp input provides adequate current to run (8) 1hp motors. Each of the 4 circuit breakers protects 2 motors.

The CS-800’s fully enclosed chassis can be mounted onto truss using half couplers, mounted into a CS model road case, or can be installed into any standard rack. Single units can be packaged together to form larger control groups. The CS-800 can also provide the relay control interface between the CHCII computer and the motors.

Manual hoist selection and running is accomplished using any of our Remote Manual Run Handsets. A typical package is shown with our P8-CS-SQ-AK25 remote with 25 ft remote cable hardwired into the handset.

STANDARD FEATURES:

• Runs up to 8 hoists
• 50 amp Hubbell power input connector
• Hubbell power and control output connectors
• 50 amp main emergency disconnect contactors
• Safety keyswitch for on/off and phase selection
• Input phase reversal
• Phase power indicators
• Choice of chassis:19” rack mountable or radial curved sides for standalone use
• Branch circuit breaker protection, 2 hoists per breaker
• Protective bar over circuit breakers
• UL and C/UL 508A Listed